PANTHER AUSF G

16T012 IMPACT set of metal tracks for Tamiya Panther G and Jagdpanther. Sold as set only. Fine detail and running characteristics. Uses the IMPACT MLR pin system, a mechanical locking system to keep the pins in place. Set contains complete set of tracks right and left, extra links.

70001 IR Emitter, by IMPACT function the same as the stock Tamiya emitter. Connector is comparable with the Tamiya MFU.

16T021 German tank torsion bar for Tiger 1 tank. IMPACT torsion bar spring suspension system upgrade. Designed for Tamiya Tiger 1, Panther G, Jagdpanther. A good upgrade over the stock suspension. Instructions included.

16T027 Elevator arm

16T014 IMPACT metal mantlet for main gun, fits only Tamiya Panther G, Panther G. Excellent details. Easy screw on installation

Modifications:
1. main gun tube hole molded to correct dimensions to eliminate barrel wobble when recoil and return to battery.
2. top edge design for higher elevation.

http://www.youtube.com/watch?v=t218v_dn53k

16T016 Set of detail sprocket wheels by IMPACT

16T011 IMPACT Panther Metal Sprocket Wheel Guide, 2 pieces, one right side and one left side. Replace plastic parts on Tamiya Panther G and Jagdpanther. The added weld marks design eliminates the existing upper hull wobbling problem, whereby the upper hull's insufficient width is unable to be hold down by the stock plastic parts (E7 & E4). Also with excellent details of nuts and holding plates.

16T013 Metal muzzle brake from IMPACT, fine in detail. One piece construction.Fits neatly to the stock Tamiya Panther G gun barrel.

Sealed Bearings

Price: $26.00

TU3 for Panther Ausf G by IMPACT. Excellent heavy duty and robust transmission Unit. Selling as a pair of left and right, steel gears. Fits Tamiya Panther Ausf G and Jagdpanther. Speed can be adjustable with a removable gear, more speed configuration is possible with the new hop up gears now available.

PAG7001 Combination Set of IMPACT metal tracks and sprocket wheels 16T012 & 16T016 for Panther Ausf G and Jagdpanther. Uses the IMPACT MLR pin system, a mechanical locking system to keep the pins in place. Set contains complete set of tracks right and left, extra links. Huge savings off the individual price.

IMPACT 1/16 Pz V Panther G Metal tracks

http://www.youtube.com/watch?v=JQ2lRgdXHdo

Photo-etched parts for Panther Ausf G by IMPACT. Parts includes working tool clips, engine compartment grills, spare tracks holder etc. Gun barrel travel lock is fully functional and workable !! Included with 50cm metal chain. View here

A complete plug in Battle System compatible with the Tamiya system -- Plug and play !! System fits all Tamiya Full Option tanks. LED's flashes when a hits occur. Kit includes the system receiver to be mounted in the turret hatch, emitter for shooting the IR beam, all wiring needed for the system and instruction manual.
Plugs direct into Tamiya MFU receptacle. This system incorporates infrared light and causes the tank MFU to generate realistic sound. The infrared light is totally harmless and there is no combat damage to your tank. Sound reproduction from the MFU reacting to the receiver has the incoming and impact shell sound, damaged motor sound, graduated loss of speed as you take hits, hit recoil, and the final tank shut down and blast sound as the system receives it's last hit. The Battle Unit has a shooting range of roughly 28 meters (indoors) and 25 meters (outdoors). Outdoors range may varies due to environmental conditions, especially the direct influence of sunlight. Systems are inspected and tested at MITOSAL office before shipping to customer.

FULLY COMPATIBLE WITH TAMIYA MFU

45021 HOP UP Gear Set 1

45022 HOP UP Gear Set 2

45023 HOP UP Gear Set 3 Hop up gears by IMPACT, giving tankers more choices of speed configuration but does not compromise torque even after a few hits. A must have for tank battling games. Even more configurations when use with IMPACT 11T or 12T Pinion gear Set.

Mitosal Models is a part of Mitosal.com

All prices quoted in this website, unless otherwise stated, are in US Dollars (USD).

The company takes all effort to ensure the prices for all items are correct and updated.

All other trade names are the properties of their respective owners and all other logos and business names are assumed to be the property of others. Prices is subjected to change without prior notice

8T, 11T and 12T Pinion gears. Made of steel, very durable and last much longer than brass pinion gears. more speed configuration possible when use together with the new IMPACT HOP UP GEAR Sets now available.

Each set comes in 2 pieces of pinion gears

One pair of tow ropes for Tamiya 1/16 Panther or Jagdpanther

Tow rope eyes are made to be WWII German tank style standard.

Stainless stain stranded ropes. Length 280mm ~290mm, diameter 2mm

Great for improving your realism in your tank

NOTE:

1. ropes and tow eyes will be shipped as unglued.

2. Depth of tow eye (for rope insertion) is ~12mm.

3. Suggest Customer to use A+B steel epoxy for gluing the parts. Any other normal hobby glue will not secure well

1/16 7.62mm Bullets, 20 pieces.
Beautifully machined 7.62mm bullet to the exact scale. Great for additional item to your display.

1/16 7.62mm Empty Cartridges, 20 pieces.
Beautifully machined 7.62mm Empty Cartridges to the exact scale. Great for additional item to your display.

1/16 7.62mm Bullet & Empty Cartridges, 20 pcs + 20 pcs of each type total of 40 pieces.
Beautifully machined 1/16 7.62mm bullet and empty cartridges to the exact scale. Great for additional item to your display.