Electronics

Electronics & Hop ups

A complete plug in Battle System compatible with the Tamiya system -- Plug and play !! System fits all Tamiya Full Option tanks. LED's flashes when a hits occur. Kit includes the system receiver to be mounted in the turret hatch, emitter for shooting the IR beam, all wiring needed for the system and instruction manual.
Plugs direct into Tamiya MFU receptacle. This system incorporates infrared light and causes the tank MFU to generate realistic sound. The infrared light is totally harmless and there is no combat damage to your tank. Sound reproduction from the MFU reacting to the receiver has the incoming and impact shell sound, damaged motor sound, graduated loss of speed as you take hits, hit recoil, and the final tank shut down and blast sound as the system receives it's last hit. The Battle Unit has a shooting range of roughly 28 meters (indoors) and 25 meters (outdoors). Outdoors range may varies due to environmental conditions, especially the direct influence of sunlight. Systems are inspected and tested at MITOSAL office before shipping to customer.

Item 53447, Battle system by Tamiya. This system uses infrared light, which allows for safe and realistic tank-to-tank battling using two or more tanks. Several damage reactions such as enemy fire and engine trouble noise, deterioration of speed, recoil of tank and flash of LED are recreated with this unit. Unit is connected to the Multi Function Unit (MFU) equipped 1/16 electric powered radio control tanks.

Have you been at a RC tank battle game but can’t join the guys just because you don’t have a tank? A day at the battlefield will never be the same. Introducing another great product from IMPACT, the miniACT A01.

miniACT are designed with IR emission that eliminates the "fan shot" effect exhibiting with Tamiya's system.

Meaning that with miniACT firing, doing a "swing firing" is not possible. This is a more realistic combat scenario

Now a panzerfaust, bazooka, PAK 35/36 and any anti-tank weapons you can think of will be possible using the miniACT A01 in simulated battles using available compatible IR systems in the RC vehicles, etc. The tide of the game may be turn by a shot from a well placed weapon and now that is made possible.

The miniACT A01 can be set in 4 modes;

1. Battle mode

2. Destruction mode

3. Test mode.

4. Range Extension mode.

The miniACT A01 is sold by itself or as a kit bundled with IMPACT or Tamiya Battle Unit.

Kit includes a battle system receiver to be mounted in the turret hatch and base when mounted outside a vehicle e.g. Anti-tank gun. Emitter for shooting the IR beam, and all wiring needed for the system. Plugs in to the Tamiya receptacle in the MFU as per the included instructions.

IMPACT miniACT A01 Battle Mode 2 Lives, Part 1/4

IMPACT miniACT A01 Battle Mode 1 Life, Part 2/4

IMPACT miniACT A01 Destruction Mode, Part 3/4

IMPACT miniACT A01 Test Mode, Part 4/4

what is ALC679 and ASC579 IR Codes

Y888 Fire Power For Tamiya 1/16 Sherman Tank

Made of steel, very durable and last much longer than brass pinion gears. more speed configuration possible when use together with the new IMPACT HOP UP GEAR Sets now available.

Each set comes in 2 pieces of pinion gears

70001 IR Emitter, by IMPACT function the same as the stock Tamiya emitter. Connector is comparable with the Tamiya MFU.

45021 HOP UP Gear Set 1

45022 HOP UP Gear Set 2

45023 HOP UP Gear Set 3 Hop up gears by IMPACT, giving tankers more choices of speed configuration but does not compromise torque even after a few hits. A must have for tank battling games. Even more configurations when use with IMPACT 12T Pinion gear Set.

IMPACT Battle System Base Harness. Unit comes fully assembled with wires and a 5pin connector. 5pin connectors are the exact same specifications as Tamiya's. It is a direct plug and play into Tamiya MFU's CN1. Great item for tankers' project that requires IR Battling.

Note: Will not fit Tamiya Battle unit.

Voltage regulator by IMPACT for those who need to reduce their battery voltage to control other devices. Small in size, will fit into most 1/16 tanks.

Dimension: 30mm (Length) x 20mm (width) x 12mm (height)

Customers have a choice of one of three codes when purchasing the miniACT A01

A) ALC679 code (Tamiya default code)

B) ASC579 code

C) Y888 code

D) AAR101 (Recovery code: when a damaged tank is fired upon, the fired upon tank's lives will be revived back to its original full life)

Do let us know of your preference when ordering the miniACT01

Watch the videos to have an imagination of the possibilities you can have;

Click here for the firing table for firing comparisons.

FULLY COMPATIBLE WITH TAMIYA MFU

Mitosal Models is a part of Mitosal.com

All prices quoted in this website, unless otherwise stated, are in US Dollars (USD).

The company takes all effort to ensure the prices for all items are correct and updated.

All other trade names are the properties of their respective owners and all other logos and business names are assumed to be the property of others. Prices is subjected to change without prior notice

This is the modified Voltage Regulator with the 18mA current limiter to work with the SMD LED device AC7008

OUT OF STOCK

IMPACT Lithium Battery Detector

Do you have instances that you had so much fun with your RC models that you had run flat with your Lithium battery without checking the safety low voltage and damaged it?

or do you have experiences that you had forgotten to pull out your Lithium battery after playing, and left it there to be drained out flat, and eventually damaging it?

How much "insurance" would be justifiable for your expensive Lithium battery?

Designed, made, tested in Singapore.

IMPACT Lithium Battery Detector:

1. Able to use on LiPo, Li-Ion, LiFe and Lithium based batteries used in RC applications (there is misprint at the item's back label)

2. For up to 5S Lithium Battery

What are the differences you will find compared to other brands:

1. For RC planes: an external 3W LED option can be connected (HOP UP item). When ALARM is activated, User will be able to see the LED blinking.

External LED connector is next to the buzzer.

2. when detected any cell at 3.4v, buzzer will be activated as "PRE-WARNING". There will be a slow blimp sound. Advice User to get ready to change new battery.

3. when detected any cell at <3.3v, buzzer will be activated as "WARNING". There will be a rapid blimp sound. Advice User to get ready to change new battery immediately.

4. At either PRE-WARNING or WARNING status, the LED read-out for that particular cell, will cycle 3 times. Enabling User to see what cell is at low voltage status.

5. If there is a sudden short drain (drop in voltage to 3.3v) and goes back to normal, the Detector will still blimp accordingly to the low voltage detected, even though it goes back to normal working voltage. This is to alert User that might be a glitch in the RC system's voltage.

If purchased value exceeded US$130.00, this item will be at special price US$4.00

email in for this request, and we will include US$4.00 to your S+H Charges